(Redirected from Recovery Mode 0x1280)

Recovery Mode 1.x (DevID=0x1280)[edit]
This is the old Recovery Mode protocol.
Implementions[edit]
- kernel driver [Archived 2008-11-19 at the Wayback Machine]
- iBooter [Archived 2008-09-13 at the Wayback Machine]
Recovery Mode 2.x (DevID=0x1281)[edit]
This is the new Recovery Mode protocol used in 2.0 iBoots.
Recovery Mode 3.x (DevID=0x1282)[edit]
This is the new Recovery Mode protocol used in 3.0 iBoots.
Recovery Mode 4.x (DevID=0x1283)[edit]
This is the new Recovery Mode protocol used in 4.1 iBoots.
Commands[edit]
usb_control_msg(idev, 0xA1, 3, 0, 0, buf, 6, 1000); //get status usb_control_msg(idev, 0x40, 0, 0, 0, buf, strlen(buf), 1000); //send command usb_control_msg(idev, 0x21, 1, x, 0, fbuf, s, 1000); //send file
After sending a file, request the status several times. Also increment x as you send.
It also has another interface which appears like a USB to serial converter.
Implementations[edit]
- [[https://web.archive.org/web/20090203182646/http://chronicdev.googlecode.com/svn/trunk/iRecovery/ Archived 2009-02-03 at the Wayback Machine] iRecovery]
- OpeniSend_rec[dead link]